- HF2 1” capsule with gold plated diaphragm
- On-Air indicator LED
- Ultra-low noise
- Voice tailored low-cut feature
- Internal pop-filter
- 10 year extended warranty when you register your microphone
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
The RØDE Broadcaster microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
STATUS
- Status
- New
- Microphone Type
- Studio Microphone
MORE SPECIFICATIONS
- Warranty
- 10-Years
- Country of Origin
- Australia
- Mount
- Ring Mount
- Extras
-
JFET impedance converter with bipolar output buffer.
Pressure Gradient.
PHYSICAL
- Availability
- Usually in 12working days
- Total Weight (KG)
-
0.577
- Total Dimensions (WxHxD) (mm)
-
167x50x65
CONNECTIONS
- Audio Output
- 3-Pin XLR Analog
- No. of Audio outputs
-
1
MICROPHONE FEATURES
- Mic Frequency Response
- 20Hz - 20kHz
- Mic Max SPL (dB)
- 128.0
- Sensitivity (dB)
- -34.0
- Polar Pattern
- Cardioid
- Transducer Principle
- Condenser
- Diameter (cm)
-
5.0
- Length (cm)
-
16.7
- Capsule
-
2.54cm (1.0")
- Signal-to-noise-ratio
-
14dB-A
- Normal impedance (Ω)
-
40.0
- Broadcaster Mic
- RM2 Stand
- ZP1 Zip Pouch
Pdf not available.
Rode Broadcaster Review
Accessory
HOT
-20%
Professional Studio Boom Arm
- Studio Boom Arm (Black)
- For radio, broadcast, studio
- Horizontal reach of 940mm
- Vertical reach of 840mm
HOT
-20%
PSA1 Studio Boom Arm
- Studio Boom Arm
- For radio, broadcast, studio
- Horizontal reach of 820mm
- Vertical reach of 840mm
Adapter
HOT
-20%
RM2 Stand Ring Mount
- Ring mount for Microphones
- 3/8" & 5/8" Thread
- Plastic
- For Studio Microphones
Cover
HOT
-20%
WS-2 Foam
- Foam Windshield
- For Condenser Microphones
- Fits directly to the Microphone
- Protects from Wind noise
Filter
HOT
-20%
Reflexion X
- Audio Filter
- For Studio Recordings
- Four-layer acoustic filter
- Wool fabric layer & Foam