This battery adapter allows you to power your camera or device that requires a Sony NP-FZ100 battery from an external power source. So you can power-up the camera or device for an extended period of time.
- The dummy pack comes with a full decoding chip inside.
- It provides an output of 7.2V - 8.4V through a Barrel Jack female connector.
- Connect the dummy battery to the MZ-PSU-16W AC power adapter for endless recordings.
- Or connect it to the MZ-DTAP-Dummy cable in order to power your camera from a Vlock/G-Lock 14.8V battery with DTAP output. This Cable converts the 12-17V power input to 8.4V stable output.
- The MZ-DTAP-Dummy cable can be also connected directly to the MZ-Vlock or MZ-Glock adapters which are used for the MZ LED lights (MZ-LED336 and MZ-LED176). In that way you can power your MZ LED light and your camera with one single VLock or Glock battery.
- With the included Extra coiled cable adapter (male to male Barrel) you can power your camera from other power converters with small Barrel Jack female output. This cable can be extended to 60cm length.
Compatibility: Sony A7RIII, A7III etc.
Specifications not available.
- Dummy battery with 30cm cable
- Extra Coiled cable 30cm up to 60cm
Pdf not available.
Video not available.
Adapter
HOT
-20%
D-TAP to Barrel
- DTAP to Barrel power cable
- Suitable for all MZ Dummy batteries
- Compatible w Sony, Nikon, Canon, Panasonic
- 12-17V power in to 8.4V stable out
HOT
-20%
USB to Barrel Male for Dummy
- USB to Female Barrel power cable
- 5V power input to 8.4V stable output
- Suitable for all MZ Dummy batteries
- Sony, Nikon, Canon, Panasonic Compatibility
Supplier
HOT
-20%
24Watt 8V/3A
- Power Supplier
- Works with Dummy Battery
- For LP-E6/E8/NP-FW50/FZ100
- 24W 8V/3A Output