SmallRig Cold Shoe Extension Plate for Sony A7III A7R III BUC2662
Key Features:
1. Specifically designed for Sony A7III and A7R III.
2. Add one cold shoe for microphone, LED or small monitor.
3. Locks to camera’s hot shoe and side strap hole.
4. Anti-scratch rubber pads.
5. Shoulder strap slot.
SmallRig Cold Shoe Extension Plate for Sony A7III A7R III BUC2662 features two cold shoes for mounting small devices like a microphone or a LED light, one on the top and the other on the left shoulder of the camera. The plate installs into your camera's hot shoe and left strap hole, with an M2.5 screw fixing it in place. It also comes with soft rubber pads on the bottom that prevents any scuffing. The plate is designed to be low-profile and can stay on the camera all the time for storage.
Designer: Nico Robin
Note:
1. The camera hot shoe is occupied with this plate attached;
2. The cold shoe on the left is only compatible with accessories with WIDTH LESS than 45mm.
Compatibility:
Sony A7III/A7R III
Key Features:
1. Specifically designed for Sony A7III and A7R III.
2. Add one cold shoe for microphone, LED or small monitor.
3. Locks to camera’s hot shoe and side strap hole.
4. Anti-scratch rubber pads.
5. Shoulder strap slot.
SmallRig Cold Shoe Extension Plate for Sony A7III A7R III BUC2662 features two cold shoes for mounting small devices like a microphone or a LED light, one on the top and the other on the left shoulder of the camera. The plate installs into your camera's hot shoe and left strap hole, with an M2.5 screw fixing it in place. It also comes with soft rubber pads on the bottom that prevents any scuffing. The plate is designed to be low-profile and can stay on the camera all the time for storage.
Designer: Nico Robin
Note:
1. The camera hot shoe is occupied with this plate attached;
2. The cold shoe on the left is only compatible with accessories with WIDTH LESS than 45mm.
Compatibility:
Sony A7III/A7R III
PHYSICAL
- Total Dimensions (WxHxD) (mm)
-
75x40x22
- Total Weight (KG)
-
0.04
MORE SPECIFICATIONS
- Extras
-
Lightweight.
- 1 x Plate
- 1 x M2.5 Screw
- 1 x Hex Spanner
Pdf not available.
Video not available.
Adapter
HOT
-20%
HawkLock Support w H21 Shoe
- Mount Adapter
- For Monitors/Lights
- 1/4" Thread Screw
- Hot Shoe Mount
HOT
-20%
Swivel Tilt Hot Shoe 1.2KG Load
- Mount adapter for Monitors/Lights
- 1/4" thread screw
- Hot Shoe mount
- Up to 1.2KG Payload
HOT
-20%
Swivel Tilt Hot Shoe 4.2KG Load
- Mount adapter for Monitors
- 1/4" Screw on Top
- Hot Shoe mount
- Up to 4.2kg Payload